Insight Pro
Programmable X-Ray Inspection System
Constant View Calibration: Programmable Multi-axis X-Ray Inspection
| The Insight Pro has an advanced 5-axis manipulator that automatically maintains constant sample to tube and detector distance. This technique maintains relative x-ray tube power and magnification during inspections to provide consistently accurate defect detection results; regardless of how the samples are manipulated during inspection. |
Insight Pro
Programmable X-Ray Inspection System
 |
Insight Pro Datasheet (Printable PDF) |
 |
See also Insight Series |
The Insight Pro is a high-resolution programmable multi-axis x-ray Inspection System suitable for a wide range of electronics and material analysis. The Insight Pro features a fully programmable multi-axis manipulator 5-axes (X, Y, Z, tilt & Pitch up to 70°). Capable of testing mixed BGA/SMT devices, connectors and Plated Thru Holes (PTH) in Manual or Automated Modes.
 |
Footprint (inches): 50"L x 45W x 723H |
| Footprint (centimeters): 144W x 116D x 185H cm | |
|
X-Ray Source: 90/ 130Kv, 5 micron, >40lp/mm |
|
Board Handling: 12” x 14” | 300 x 360mm |
|
Sample Manipulation: 5-Axes (X, Y, Z, tilt & pitch up to 70°) |
|
Options:
|
| Automated (mode): | |
 |
Fully programmable positioning and defect detection |
|
Automated test in both 2D and 3D (oblique) views |
|
“Teach-&-GO” macro, or CAD driven test development |
|
Automatic calibration and image correction for accurate measurements and consistent defect detection results |
| Manual (mode): | |
|
High-resolution imaging for accurate Failure Analysis |
|
Real-time 2D and 3D (off-axis) viewing up to 70 degrees |
|
Inspection Point Navigator™ (optical/x-ray coupled view) |
|
Advanced 5-axis control w/ one hand (via Space Mouse™) |
| Constant View Calibration | |||
|
This feature automatically maintains the relative x-ray tube power and sample orientation (magnification/field-of-view) during inspection routines. This unique feature provides accurate measurements and consistent defect detection results. | ||
|
Automatic image de-warping corrects image optical distortions | ||
|
|||
Controls and Indicators
|
INIT Button and Indicator (green)
|
|
•Interlock Indicator (yellow)
|
|
•Key Switch STANDBY / ON
|
|
•Door OPEN / CLOSE Button
|
|
•X-ray ON / OFF
|
|
•LOAD Button
|
|
•Space Mouse 5-axes motion control
|
|
•Keyboard and Mouse
|
|
Barcode Reader |
|
Main Power Switch |
|
X-ray ON Warning Light |
|
Emergency Power OFF (EPO) Button
|
| Mouse Button Operation | Effect | |
| X | Puck left / right | Table moves X |
| C | Puck tilt forward / backwards | Table tilts around Y |
| Y | Puck forward / backwards | Table moves Y |
| Z | Puck up / down | Tube moves up /down |
| B | Puck tilt left / right | Table tilts around X |
| C | Puck tilt forward / backwards | Table tilts around Y |
|
Application Tool Library (AAT) for fast development of SMT/THT/BGA solder joint inspection routines.
|
|
Inspection Point Navigator™ provides both optical and x-ray coupled viewing for rapid positioning and positive location identification.
|
|
“Teach-&-GO” or CAD driven test development facilitates rapid inspection routine development from CAD or point-and-click macro functions. |
|
Automatic Constant View Calibration automatically maintains the relative x-ray tube power and sample orientation (magnification / field-of-view) during inspection routines. This unique feature provides accurate measurements and consistent defect detection results. |
MSX Image Analyzer Suite
Application Tool Library (AAT)
Configuration, Control and
Image Processor Screens
with Inspection Point Navigator™
(optical/x-ray coupled view)
