 |
|
 |
|
|
|
DEN-ON™ Hand Tools and Accessories
Soldering Tools / Pre-Heaters / Fixtures
|
|
|
|
| |
|
|
|
|
|
|
PCB Repair and Rework Hand Tool Solutions |
|
|
Remove, Replace, Clean and Reflow Accessories for eutectic and lead free solders
FocalSpot, Inc. distributes DEN-ON RD-500 Series BGA/SMT Rework Stations, hand tools and custom accessories in North/South America, Canada and Mexico.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nozzles, RD-500 Series |
|
|
|
|
 |
|
| Nozzles for DEN-ON™ RD-500 Series and Pace™ Rework Stations |
Standard and custom nozzles for DEN-ON RD-500 Series BGA/SMT Rework Stations.
- Nozzle kits
- Standard ANZ & BNZ types
- Fixed & adjustable wall types
- Custom connector nozzles
|
|
| |
|
|
|
Vacuum Pads, RD-500 Series |
|
 |
|
|
 |
|
| Vacuum Pads for all RD-500 Series Rework Stations |
Vacuum Pad / Tip sizes for DEN-ON rework stations.
- 61-02-06 Ultra Large
- 61-02-02
Large
- 61-02-03
Medium
- 61-02-01Small
- 61-61-03Ultra Small w/ SS Pipe
|
|
|
|
|
PCB & Device Fixtures |
|
|
|
|
 |
|
| PCB / Part Holders RD-500 Series, Standard and Custom Tooling |
FocalSpot's designs custom board supports, board/part holders, fixturing and tooling accessories
to meet the widest range of board support applications and tooling requirements.
- Board Holders
- Parts Trays
- Custom Tables
|
|
|
|
|
Side Inspection Camera |
|
|
|
|
 |
|
| Side Inspection Camera SIC-05 |
The SIC-05 Side Inspection Rework Camera enables a user to visually monitor the solder reflow
process in action. The ability to observe in real-time: placement force, placement
accuracy and view the device reflow process, makes this a useful tool
for fast/accurate processes development.
- CCD camera with high magnification optics
- LED lighting source
- 5.6" color monitor
- Adjustable support system
- Power Supply and cables
|
|
|
|
|
Pre-Heater, PH-3100A |
|
|
|
|
 |
|
| Pre-Heater PH-3100A |
The PH-3100A standalone pre-heater uses (2) two 200W IR heaters and closed - loop control to provide fast safe manual desoldering, site prep and cleaning prior to rework. The PH-3100A is designed for multi-layered PCBs, Lead-free solder and devices with large heat sinks.
- 400W IR pre-heater ensures evenly distributed heating
- PCB holders (included) are used for fast load and unload
- PCB supports (included) are used for stability during rework
- Wide Area heating design prevents board warping caused by uneven heating
|
 |
No additional information available |
|
|
|
|
De-Soldering Tool, SC-7000Z |
|
|
|
|
 |
|
| De-Soldering Tool SC-7000Z |
Direct connection between the diaphragm pump and tip provides high vacuum efficiency accommodating 8-12 layered PCB. A 100W ceramic heater with sensor feedback temperature control circuit and high vacuum capacity provides excellent work efficiency with no failure. Capable of removing SMD components using a hot blow nozzle.
- ESD safe
- Compact and light-weight
- Low-noise and low-vibration
- Over 10,000
sold worldwide
|
|
|
|
|
Soldering Station, SC-200 |
|
|
|
|
 |
|
| Solder Removal Station, Programmable SC-200 |
The SC-200 employs hot air heating which is used to preheat the area to be soldered prior to contacting the solder joint or pad which greatly reduces the chance of overheating and lifting the pad areas being reworked. This feature also prevents the tip from cooling during de-soldering and nearly eliminates clogging caused by cooled solder. Making them one of the most versatile desoldering tools available.
- Unique high-power heating system
- Unique dual hot air / hot tip design
- Internal pump
- N2 capable
|
|
|
|
|
Soldering Tool, SS-8200 |
|
|
|
|
 |
|
| Soldering Iron, Temperature Controlled SS-8200 |
The SS-8200 soldering iron is designed as a compact versatile soldering tool.
Temperature control is achieved through a small
control unit located within the handle. The SS-8200 is lightweight and ergonomically designed. A variety of standard tips
make the SS-8200 one of the most versatile
soldering irons on the market.
- ESD Safe
- The temperature control is built-into the hand piece
- Ceramic type, 200 Watt heating element
- Temperature Range 200-450℃
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FocalSpot, Inc. is the Master Distributor for DEN-ON lead-free PCB rework solutions in North/South America, Canada and Mexico. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SITE SEARCH |
|
|
|
|
|
WebMaster
|
|
|
| Site Map
| |
 |
|
 |
