Verifier (FSX-080)
Standard-Resolution
X-Ray Inspection System
|
Related Topics 
Verifier (FSX-080)
Standard
X-Ray Inspection System
The Verifier is an ideal low-cost BGA/SMT QuickCheck™ solder verification and defect detection tool with a footprint of only 32 x 34". Designed for fast and intuitive operation, the Verifier provides continuous real-time x-ray solder verification, fundamental defect detection and rework verification.
 |
The Verifier supports a broad range of fundamental failure analysis and inspection applications from general failure analysis to rework verification.
|
|
Sample handling: up to 16 x 18" (406 x 457mm) |
|
Small footprint of 32 x 34" | 813 x 864mm easily rolled to where ever needed (i.e., production floor, prototype lab, rework area, etc.)
|
|
Greater than >100X magnification provides excellent viewing of the smallest SMD electrical interconnections.
|
|
Systems are CE, CSA and TUV certified and exceed all safety and radiation protection requirements set forth by CDRH and FDA regulations. |
 |
Verifier Datasheet (Printable PDF) |
|
FSX-080 Apps Report (Printable PDF) |
| Optional Image Processors |
 |
The standard sample manipulator has five angled set points, to provide angulations up to 30° or more depending on board size.
|
|
Angular viewing provides improved detection of opens, non-wetting and void position.
|
 |
See also Rotation Fixtures |
Controls and Indicators
|
Failure analysis |
|
Process validation |
|
Semiconductor prototyping |
|
Bare board registration |
|
Rework verification |
|
Emergency OFF switch |
|
Safety Interlock Indicators |
|
ESD Ground strap terminal |
|
Keyed main power switch |
|
X-ray on/off switch |
|
X-ray: KV and mA controls |
|
Camera: 2/4" I. I., zoom and gain controls |
|
Assessment of reflow thermal profile results |
|
Uniformity of solder shape lead to board pad |
|
Effect on devices in proximity of the rework operation |
|
Device and package placement / positioning |
|
and more... |
| (1) | High-resolution 80kV, 50 micron no-maintenance microfocus x-ray source offers continuous real-time inspection, defect detection and failure analysis.
|
||
| (2) | Sample Manipulator (Board Holder): Positions the sample in the x-ray path. Provides off axis positioning (tilt /rotate) of the sample between the source and detector.
|
||
| (3) | High-resolution 2/4" image detector with zoom lens provides >100X magnification for detailed viewing of the smallest SMD electrical interconnections. Field-of-view (FOV), the system is capable of displaying 20mm packages in a single view for rapid identification of bridges, missing, poor shape and large voids. |
||
| (4) | Camera (lens optics and CCD Sensor): Converts analog light waves into digital video signals |
||
| (5) | The Image Processor (Computer, Frame Grabber
and VIP software); captures and displays x-ray images
in real-time while providing an operator with tools
to enhance, identify, analyze, measure and report — sample quality and defect characteristics.
|
X-Ray Imaging Train
